FRONT BODY SUPPORT FOR XRAY X4'25 / X4'26 & X4F'27 MAX-09-031
With the trend of feather light bodyshells and even higher top speeds, deflection of bodyshells became an issue for serious racers! The solution is our MXLR Front Body Support for XRAY X4'25 / X4'26 & X4F'27 cars which:
- prevents deflection of the bodyshell under higher speeds
- reduces the risk of cracking the front wheel arches of the bodyshell
The result is an extended lifetime of your bodyshells combined with better performance on the track as the shell will stay in its original shape and produce more downforce!
Our MXLR Front Body Support is made from high quality plastic, including some laser engraving on both sides.
In the design process we took special care about the "flex" in this area. Our Front Body Support is designed to have the least flex influence possible!
For the installation we recommend:
- 2x 8mm long M3 screw to install the Body Support on the front bumper plate (not included).
- 1x 6mm long Alloy screw to set the Front Body Support to the correct height (not included)!
The screw should touch the hood without additional free play when the bodyshell itself is resting on the front bodypost clips/O-rings.
Sidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality our printers are able to deliver. Still you need to keep in mind that 3D printed parts are not the same standard as machined or molded products.
MAX-09-031 contains:
1x Front Body Support for XRAY X4'25 / X4'26 & X4F'27
INFO: We may use additional parts, cars and/or items to display the use of our above described and named product. This additional parts, cars and/or items are NOT part of the above described and named product. The above described and named product consists only and exclusively the parts mentioned under "The product contains:"
You must read and follow the GENERAL & SAFETY PRECAUTIONS before use, which can be found here: INSTRUCTIONS
.jpg/picture-200?_=1a0c98cde30)