A passion for RC-racing and the pursuit of perfection - this is the key philosophy of MXLR.

MXLR FAN BOOSTER MAX-13-001

Our MXLR FAN BOOSTER is designed to level up your cooling game! 
Simply connect the FAN BOOSTER via the JR Servo Plug with your receiver, plug your Fan into the FAN BOOSTER and experience the difference!

This small device transforms the 6V of your receiver to 8V output, which will increase the speed of your fan and by this the cooling ability! This leads to less fading, more consistency and by this more speed over run time. Simple huh ? 

The MXLR FAN BOOSTER comes in a lightweight alloy case, with one JR Servo Plug to connect to the receiver and one female JST connector to plug in the fan. Clearly all wires and plugs are black! 
The unit weights 4,5g. and has the following case dimensions: 
24,20mm long / 13,20mm wide / 6,2mm high
Wire legth: 29,50mm (to receiver) / 41,50mm (fan connector)
Max Voltage input: 8.0V 
Min Voltage input: 4.0V

IMPORTANT NOTICE: 
- make sure your used cooling fan can work/operate at 8,0V !!!
- always check the polarity before plugging in the booster / fan !!!
- we recommend to use this FAN BOOSTER only with ESC's that provide stable BEC voltage !!! 

MAX-13-001 contains:
1x MXLR FAN BOOSTER


INFO: We may use additional parts, cars and/or items to display the use of our above described and named product. This additional parts, cars and/or items are NOT part of the above described and named product. The above described and named product consists only and exclusively the parts mentioned under "The product contains:"
You must read and follow the GENERAL & SAFETY PRECAUTIONS before use, which can be found here:  INSTRUCTIONS

 

MAX-13-001 (1) (small)
MAX-13-001 (1) (small)
MAX-13-001 (2) (small)
MAX-13-001 (2) (small)
MAX-13-001 (3) (small)
MAX-13-001 (3) (small)
MAX-13-001 (4) (small)
MAX-13-001 (4) (small)